Piano table/stool

A "moravian stool" inspired table and stool for an electric keyboard. Made from reclaimed wood from a wardrobe shelf and a couple of curtain rods.

Sliding dovetailed battens and holes bored at approximately 5° and 15°
Through tenons were wedged and glued
Mounting brackets screw into the piano and sit over the table so it can be repurposed as a hall table

Somewhere around this time I also refurbished this chest of drawers.  Stripped/sanded most of the paint.  Disassembled and re-glued. Replaced worn drawer runners. Finished with boiled linseed oil.

And I built a quick little "bookshelf" to go under a coffee table (wood was from some old drawer sides, which is why there is a groove around the bottom):