Workbench planing stop that can be raised & lowered using the threaded rod. I used a 3/8" threaded rod to match the threaded insert, since that was what I had on hand.  On the end of that I tapped a M8 threaded section to fit…

Four-legged stool that transforms into a pot-plant stand (or the other way around). Reclaimed pine from a bed frame, 2 way splayed and tapered legs, tried a basic "shou sugi ban" finish with a propane torch (heavier on the seat, lighter on the legs).  Finished…

Simple cutting gauge from some scraps (merbau and a mystery wood).  Cutter from a piece of old jigsaw blade. Added a hole to hang it after taking the photo.

Reclaimed merbau rack to store our over-the-ear headphones. Cleaned up Front frame with a kind of recessed through-tenon Dovetailed bottom frame Rough shape Dividers in place Stupidly blurry in-use shot Finished with shellac

A couple of small boxes made while experimenting with a grooving plane and mitre saw. The first box was framed with reclaimed hardwood from a patio umbrella.  Pine panels were bevelled and "lacquered" with an India ink and shellac mix. The second box was also…